Shenzhen Mingyangxing Electronics Co.,Ltd

Product Categories

Contact Us

Shenzhen Mingyangxing Electronics Co.,Ltd



Office:No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen

Home > Knowledge > Content

Talking about the problem of PCB layer deviation

With the development of high-level and high-precision PCB boards, the inter-layer alignment accuracy requirements are becoming more and more strict, and the PCB board layer bias problem is becoming more and more serious. There are many reasons for the PCB layer bias. Now we share with you the main factors affecting the layering phenomenon.

The general definition of PCB layer bias:

The layer bias refers to the difference in concentricity between the layers of the PCB board that is originally required to be aligned. The requirements range is controlled according to the design requirements of different PCB types. The smaller the hole-to-copper spacing, the stricter the control is to ensure its ability to conduct and over-current.

In the production process, the method of detecting the partial deviation is commonly used:

At present, the method commonly used in the industry is to add a set of concentric circles in each corner of the production board, and set the spacing between concentric circles according to the requirements of the production layer, and pass the X-Ray inspection machine or X-drill in the production process. The target machine looks at the concentric offset to confirm its layered shape.

Analysis of the causes of PCB layer deviation:

First, the inner layer is biased

The inner layer is mainly the process of transferring the graphics from the film to the inner core board. Therefore, the layer bias will only be generated during the graphic transfer production process. The main reasons for the layer bias are: inconsistent expansion and contraction of the inner film, exposure machine Factors such as misalignment and improper operation during personnel alignment.

Second, PCB board pressing layer bias reasons

The main reasons for the pressure-bonding layer are: inconsistent expansion and contraction of each core layer, poor positioning hole, misalignment of fusion, riveting misalignment, skateboarding during pressing, etc.

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML
Company Profile
With professional and productive PCBA factory, Mingyangxing Electronics is one of the top level PCBA, FPC, custom PCB, ciruit design, quick turn pcb prototype manufacturers and suppliers. Welcome to wholesale products from us.
Contact Us
Address: No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen
Tel: +86-755-89456692  Fax: 86-755-89456692
Copyright © Shenzhen Mingyangxing Electronics Co.,Ltd