Shenzhen Mingyangxing Electronics Co.,Ltd

Product Categories

Contact Us

Shenzhen Mingyangxing Electronics Co.,Ltd



Office:No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen

Home > Knowledge > Content

The width of the printed conductors

Minimum width of the printed wire, mainly by the conductor and the insulating substrate adhesion strength and their current value. Printed conductors can be as wide as possible, especially the power and ground wires, allowed under the conditions of the plate surface as wide as possible, even if the area under stressful conditions is usually not less than 1mm. Especially the ground, even if the local widening is not allowed, should also be widened where allowed to reduce the resistance of the entire Earth System. The wires longer than 80mm, even if the current is unlikely, should also be widened to reduce the effects of pressure drop of wire on the circuit.

Previous: Pore size and pad size

Next: No Information

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML
Company Profile
With professional and productive PCBA factory, Mingyangxing Electronics is one of the top level PCBA, FPC, custom PCB, ciruit design, quick turn pcb prototype manufacturers and suppliers. Welcome to wholesale products from us.
Contact Us
Address: No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen
Tel: +86-755-89456692  Fax: 86-755-89456692
Copyright © Shenzhen Mingyangxing Electronics Co.,Ltd