Shenzhen Mingyangxing Electronics Co.,Ltd

Product Categories

Contact Us

Shenzhen Mingyangxing Electronics Co.,Ltd



Office:No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen

Home > Knowledge > Content

To choose plates, we need to consider the impact of SMT

In the lead-free electronic assembly process, due to the increase in temperature, the degree of bending of the printed circuit board due to heat is increased. Therefore, in the SMT, a board with a small degree of bending is required as far as possible, such as the FR-4 type substrate. Because of the influence of the expansion and contraction stress on the device after the substrate is heated, it will cause the electrode to peel off and reduce the reliability. Therefore, the material expansion coefficient should be paid attention to when selecting the material, especially when the device is larger than 3.2×1.6 mm.

PCBs used in surface mount technology require high thermal conductivity, excellent heat resistance (150°C, 60min) and solderability (260°C, 10s), high copper foil bond strength (above 1.5x104Pa) and bending strength (25 ×104Pa), high electrical conductivity and small dielectric constant, good punching (accuracy ±0.02mm) and compatibility with cleaning agents, in addition to the appearance of smooth and flat, can not appear warping, cracks, scars and rust spots.

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML
Company Profile
With professional and productive PCBA factory, Mingyangxing Electronics is one of the top level PCBA, FPC, custom PCB, ciruit design, quick turn pcb prototype manufacturers and suppliers. Welcome to wholesale products from us.
Contact Us
Address: No.221 Shenshan Road, Pingshan Street, Pingshan New District, Shenzhen
Tel: +86-755-89456692  Fax: 86-755-89456692
Copyright © Shenzhen Mingyangxing Electronics Co.,Ltd